Epoxy Flooring in Kirkland, WA

Floors for the way homes are used now

Garages here rarely just hold a car. They hold an electric vehicle on a charger, road and mountain bikes, paddleboards, a home gym corner and the overflow from a house that has no basement. In newer contemporary homes, the garage is often the main entrance the family uses every day. A raw slab collects dust, shows every drip and feels unfinished next to the rest of the house. A coated floor makes the space feel like part of the home: bright, clean and easy to keep that way.

We work across a wide mix of properties: hillside homes with steep driveways, mid-century ranches with older slabs, townhomes with tuck-under garages, condo buildings with shared parking and storefronts and offices near the water. Each one has its own constraints, from HOA rules and shared walls to tight access and limited parking for our trailer. We plan around them so the job goes smoothly.

Prep that holds up

Every floor we coat is diamond ground with dust collection. That opens the concrete so the primer bonds into it rather than sitting on top. We test moisture, look for sealers and curing compounds, fill cracks and repair damaged edges before the first coat. This is the difference between a floor that lasts and a kit coating that lifts under hot tires within a year.

What we install

• Garage floor epoxy for attached and tuck-under garages.
• Flake floors for texture, grip and easy cleaning.
• Polyaspartic coatings for one-day installs and UV stability.
• Metallic epoxy for basements, studios and showrooms.
• Commercial floors for offices, retail, restaurants and parking areas.
• Polished concrete for modern interiors.
• Coating repair for peeling or worn floors.
• Concrete sealing for patios, walks and stairs.
• Driveway coating for steep and worn drives.
• Epoxy countertops for kitchens, baths and bars.

Townhomes, condos and HOAs

Many owners live in communities with association rules about work hours, noise, parking and exterior appearance. We are used to that. We can provide product data, insurance details and a scope of work for board approval, keep our equipment within your unit's space and clean shared areas as we go. Dust-controlled grinding and low-odor products make it easier on neighbors through shared walls.

Electric vehicles and heavy cars

EVs are heavy, and their tires can be hard on thin coatings. We build garage systems thick enough for that weight and finish them with topcoats that resist hot tire pickup. If you are adding a charger or moving one, we can coat around the mounting area and leave a clean, finished look.

Steep driveways and wet tires

Hillside lots mean steep driveways that send rainwater and grit straight into the garage. We add texture to flake and polyaspartic floors so they stay grippy, pay extra attention to the door threshold where water collects and can coat or seal the driveway as well.

Design choices

Light grays and whites suit modern homes with clean lines. Darker blends hide more dirt in busy family garages. Metallic floors add drama to basements and studios, and polished concrete fits minimalist interiors. We bring samples to your home so you can see them in your own light.

How a project runs

We start with a visit to measure, test and talk about how you use the space. You get a written quote with prep, materials and schedule. Most garages take one to two days, and polyaspartic systems can often be done in one. We clean up fully and walk you through care before we leave.

Basements, ADUs and bonus spaces

Daylight basements and backyard ADUs are common here, and many sit on concrete slabs that were never finished. A coated or polished floor turns those spaces into usable rooms for guests, offices, studios or rentals without the cost of wood or tile. Concrete floors handle the occasional damp day better than carpet, and they pair well with area rugs and radiant heat. We test moisture first, then recommend metallic, flake or polished concrete depending on the slab and the look you want.

Why prep and testing come first

Most coating failures trace back to shortcuts: no grinding, no moisture test, leftover sealers or thin material. We would rather spend more time preparing than come back to fix peeling later. That is why every quote lists the prep steps in detail and why we explain test results before we choose a system. You will know what is under your floor and why we chose the products we did.

Questions we hear most

People usually ask how long a floor lasts, whether it will be slippery and how soon they can park. Our answers depend on the system, but a properly prepared flake or polyaspartic floor lasts many years, textured finishes keep footing secure, and most garages are back in use within days.

Get started

Call (000) 000-0000 or request a quote. Hours: Monday to Friday, 7am to 7pm. We serve Kirkland, WA.